Double Glazing Locks Repair
When a double glazing window won't close it creates draughts and allows heat to escape. It also reduces the security of your home and puts you at risk of burglary.
Double glazed window seals, hinges, and handles may break down over time. If this happens, it could affect how your windows work and could invalidate any warranty you may have.
Locks that aren't working
While many take great care when installing anti-burglar security systems for their gates and main doors but they often forget that windows are among the top targets for burglars. Poorly secured locks can cause draughts, let valuable heat escape and compromise the security of your home.
If you find that your uPVC window locks aren't functioning, there is a good chance that the lock mechanism is blocked. This is usually caused by a split in a gearbox component. This can cause the handle to turn 360 degrees, but not open. This is a frequent issue with uPVC casement windows, but is also seen in tilt and turn windows, and even sliding sash windows.
If this happens, you'll be able to release the lock by pressing the lever handle. This will allow you to open the gear box and restore the opening of the window. If this doesn't work, you may have to replace the window lock mechanism entirely.
Most modern uPVC windows use espagnolette locks. These are locking systems inside the window that secure the window with mushroom-shaped locking cams in the frame keep. The handle is the trigger for the gearbox, which then activates the cams for either up or down movement. The most frequent issue is when the spindle on the lock has been damaged and the handle is unable to move freely but not move the window open or close.
A faulty gearbox can also cause your window to appear to be locked but not actually be. This can occur when the rods that are the center, also known as crocodile teeth fixings within the gearbox break off. Misty Glaze will supply and install replacement rods in the event that this happens.
It is not advisable to force a broken lock or stuck lock. This can cause the lock to break or snap - particularly with a window made of uPVC because it expands and shrinks as it warms up and cools. It is best to call a professional locksmith to determine the issue and repair it.
Sticky Doors/Window
It is annoying to have doors and windows that are stuck, but they may be a sign of more serious structural problems. If you're having difficulty to open or close a window or door it is crucial to seek out professional assistance as soon as possible. The problem could be caused by a variety of causes, including foundation settlement or the lack of support for the crawl space.
Frame or humidity issues can cause doors and windows to become stuck. When exposed to moisture, wood frames can warp. This could make opening and closing them a challenge even if the hardware is in good shape. The wood swells as it expands and is pushed up against the hinges, creating friction.
Rub the door or window with soap to decrease friction if it gets stuck in summer. It will shrink and may help temporarily solve the issue. This procedure will have to be repeated sporadically during periods of high humidity.
A more permanent fix involves sanding the door or window frame to create a smooth finish. This can be done by hand or using the power tool. A professional can also sand, paint or stain your frame or door to make it look new once more.
If soaping or sanding don't solve the problem, it could be due to foundation settlement or a compromised crawlspace. Look for cracks in the area. If you notice these signs, it's time to call in a foundation repair specialist. Damage to the foundation can lead to uneven floors and misaligned interior walls, which in turn causes stuck doors and windows. To avoid costly and risky repairs, it's important to deal with these issues as soon as possible. These issues could escalate until your home is unsafe to live in if it is not taken care of. Contact the Southeast's most renowned foundation repair specialists today to set up an inspection and repair service!
Cracking/Blowing Issues
When double glazing starts to wear down, it could cause cracks to develop. This can be unsightly and also allow all the heat that has been stored in your home to escape. It also poses dangerous for your family, as the sharp pieces of glass could cause injuries in the event that they break. It is recommended to fix any double glazing windows that have cracks prior to it getting worse, as this may increase the cost of replacing them.
Window seals are crucial to stop drafts from entering your home and keep air between the window panes. However, over time these will deteriorate or shrink due to weather changes. If not taken care of, it could lead to moisture, condensation and draughts inside your home.
This issue can usually be solved by a professional. double glazing repair near me can replace the window seal in order to restore your windows back to their original condition. They will also suggest other features that will reduce the possibility of a stress fracture occurring in the future, for example trickle vents for improved ventilation.
It is also possible to try lubricating the hinges and handles on your windows and doors. This will enable them to move more smoothly and allow the lock to perform as it was intended. Rub some lubricating oils on a lint-free cloth and then rub them into hinges and handle mechanism as well as in places where they go through frames (for example for sash window). It is also beneficial to remove handles from their frames and clean them with warm water to rid them of any dirt or grit that has been sunk into them.
If your uPVC doors and windows aren't functioning as they should, it's crucial to contact a professional to repair them. They will be able to determine the issue quickly and fix it within a short amount of time. It's safer and less expensive than trying to fix the issue yourself and possibly damaging the mechanisms. It also gives you peace of mind knowing your home is secure and safe.